CV Drive Shaft Drive Shaft Rough Country #RCS5095.1
This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard off the shelf mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
Collapsed Measurement: 33.75-inches Extended Measurement: 37.25-inches Eliminates contact between the stock drive shaft and oil pan on automatic transmission models
After lifting your Jeep JK Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft
Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep.
- ONLY fits Dana 30 & 44 front axle models. Recommended on models with 3.5in - 6in of lift.
- ONLY fits Dana 30 &
- 44 front axle models.
- Recommended on models with 3.5in - 6in of lift.
- Installation Time: 2-3 hours
- Includes Brute Force Red seals Includes better quality CV joints
- Shaft strength is twice as strong as the factory equipped drive shaft
- Ships in Multiple Boxes N
- Shipping Options No Restrictions
- Title CV Drive Shaft - Front - Dana 30/44 - Jeep Wrangler JK/Wrangler Unlimited (07-11)
- Category Driveline Acc
- Install Time 2-3 hours
- Prop 65 Yes/No Yes
- Prop 65 (C, R or CR) CR
- Prop 65 - Short Label WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
- Prop 65 Warning Label Warning - Both Cancer and Reproduction.JPG
